Drift Wall Flats

My master bedroom/bathroom has been completely remodeled but I felt it needed something else. I have a 8 X 12 wall behind my king bed that I used to install these wall flats for an accent wall. They are very light, easy to cut, and install. I used adhesive, a blade for cutting, and didn't find them difficult to work with considering I have never done anything like this before. The end result is exactly what I wanted! I would recommend these flat flats to anyone looking for a cost effective product to spice up a wall.

A couple tips from lessons learned:
Adhesive works great but it will give off hazardous fumes for up to 48 hours. Ventilate the room well, and wear a respirator if you choose this route. Wipe the adhesive that seeps up between the tiles right away, this will save you a lot of post clean up.

If your going for the flush look (no gap between the tiles) make sure they are flush as you install. That will save you a lot of post work to fill in the gaps.

I used a metallic paint from Sherwin Williams. The metallic really makes the shapes pop. It did require 5 coats of paint so plan your project time accordingly.

A great product. Follow the instructions and you won't have an issue installing these wall flats.

The only trouble I really had installing these was in addressing the joints for a nearly seamless installation. I could not use a putty knife because they were all too wide to fit in the narrow space between the 3D aspects of the Tierra wall flats. I cut up an old iTunes gift card to just under ½ strips and used it as a makeshift putty knife and it worked well.

Love it

I have purchased several times thru INHABIT and am always more than pleased. I am using their wall flats in my Salon because I have been so happy with the ones I have throughout my home.
Thank you INHABIT for bringing a modern and edgy touch to my home and now place of work.

Installing it on the wall was easy the finishing was more time consuming than anticipated but the reward is worth it